HIS & HERS
- Board(s) - I used a scrap piece of 1"x12" oak that was about 6" long.
- "His" vinyl and "Hers" vinyl
- 2 Hooks with screws
- Stain or paint/sealer (optional)
- Drill with drill bits
- Screwdriver or screwdriver bits for the drill
*In my rush to finish this for Christmas, I failed to take process photos. I'm sorry. If you have questions, let me know and I'll do my best to clear things up. Hopefully, it's pretty simple.
- Because I used a piece of oak scrap, I didn't need to stain or paint my board. It was already finished. If you used something else and you want to stain or paint the board, do so now. Let it dry thoroughly.
- Apply the vinyl "His" and "Hers" decals. Play around with placement to find what layout you like the best. If you opt to use two boards, do one on each board, obviously. Make sure there will be adequate room for the towel hooks and the towels to hang and dry. I didn't want to cover up any of my vinyl with the towels so I went with an off-set layout for my hooks.
- Decide on the layout of you hooks as well, but don't attach them yet. When you find a layout you like, stick down the vinyl. If you want to apply a sealer, do so now. Let it dry completely.
- Lay down your hooks again and mark the holes for the screws. Drill small holes where you marked.
- Sink your screws and tighten down the hooks.
You will need a way to attach the board(s) to your wall. I opted to just attach the boards to the walls with screws. I located studs in the walls and then sunk two screws into each board to secure them. You could also put a sawtooth picture hanger or a wire hanger on the back and then put them on the wall with nails or cute little cup hooks or something. If you personalize this project, I'd love to see how. Towel hooks for your kids would be super cute!
If you'd like to get more While He Was Napping, you can find me here: